| JULIPO |
08-11-2015 13:50:22 |
problema al cargar libreria dll
Reciban un cordial saludo.
estoy integrando una libreria dll para la conexion de lectoras biometricas pero no me funciona realmente nada.
la informacion del fabricante indica
Cita:
4.1 Connect
[Function] int Connect(const char *Parameters)
[Objective]
The function is used to connect a device. After the connection is successful, the connection handle is returned.
[Parameter description]
[in]: Specify the connection options through the parameter, for example:
"protocol=RS485,port=COM2,baudrate=38400bps,deviceid=1,timeout=50000, passwd=”;
“protocol=TCP,ipaddress=192.168.12.154,port=4370,timeout=4000,passwd=”;
To connect a device, the system needs to transfer the device-related connection parameters.
protocol indicates the protocol used for communication. At present, RS485 and TCP can be used.
port: Communication port of the device. For example, if the RS485 protocol is used, you can set port to
COM1: If the TCP is used, the default port is 4370 unless otherwise noted.
deviceid: Device ID used by the serial port.
baudrate: Baud rate used for the communication of the communication of the serial port.
ipaddress: IP address of the related device for TCP/IP communication.
timeout: Timeout time of the connection (unit: ms)If the network connection is in poor condition, you
should set the parameter to a larger value. Usually, timeout=5000 (5 seconds) can meet the basic network
needs. When the query result contains the error code of -2, you should set timeout to a larger value, for
example, timeout=20000 (20 seconds).
passwd: Connection password of the communication. If the parameter value is null, it indicates that no
password is used.
(Note: The connection parameters are case-sensitive)
[Returned value]
If the device is connected successfully, the connection handle is returned. Otherwise, the error code of 0 is
returned.
[Example]
Python:
params = “protocol=TCP,ipaddress=192.168.12.154,port=4370,timeout=4000,passwd=”
self.commpro = windll.LoadLibrary("plcommpro.dll")
constr = create_string_buffer(params)
self.hcommpro = self.commpro.Connect(constr)
c#:
params = “protocol=TCP,ipaddress=192.168.12.154,port=4370,timeout=2000,passwd=” ;
IntPtr h = Connect(params);
|
en delphi hice la siguiente codificacion para enlazar la libreria pero me genera errores
Código:
Function connect (Parameters : pansichar):integer; stdcall external 'plcommpro.dll';
procedure TForm1.Button1Click(Sender: TObject);
var
parametros:ansistring;
param1:pansichar;
begin
parametros:='protocol=TCP,ipaddress=192.168.12.154,port=4370,timeout=4000,passwd=';
GetMem(param1, Length(parametros)+1);
StrPCopy(param1, parametros);
if connect(param1)=1 then
begin
ShowMessage('Coneactada');
end
else
begin
ShowMessage('Desconeactada');
end;
end;
pero me genera el siguiente error cuando compilo en 64
Cita:
---------------------------
Debugger Fault Notification
---------------------------
Project C:\Users\juliodyn\Documents\Embarcadero\Studio\Projects\lectoras pull\Win64\Debug\Project1.exe faulted with message: ' c0000139 ENTRYPOINT_NOT_FOUND'. Process Stopped. Use Step or Run to continue.
---------------------------
OK
---------------------------
|
y el siguiente error cuando compilo en 32 por ver que pasaba
Cita:
---------------------------
Debugger Fault Notification
---------------------------
Project C:\Users\juliodyn\Documents\Embarcadero\Studio\Projects\lectoras pull\Win32\Debug\Project1.exe faulted with message: 'system exception (code 0xc0000409) at 0x77099610'. Process Stopped. Use Step or Run to continue.
---------------------------
OK
---------------------------
|
Que es lo que estoy haciendo mal?
de antemano gracias por la ayuda que me puedan brindar |
