FTP | CCD | Buscar | Trucos | Trabajo | Foros |
|
Registrarse | FAQ | Miembros | Calendario | Guía de estilo | Temas de Hoy |
|
Herramientas | Buscar en Tema | Desplegado |
|
#1
|
|||
|
|||
Se tilda la transferencia de indy Ftp...
Holaa como andann??? Estoy trabajando con el componente Indy Ftp cliente.
El problema es que cuando descargo un archivo se tilda la aplicación, osea se conecta bien , busca el directorio se dispone a bajarlo y cuando esta un rato trabajando este se tilda. El código es muy sencillo aca lo dejo.
Lo único que configuro de las propiedades del IDFTP es el usuario, pasw, puerto y host, no se si hay q modificar algo mas.. Encima como podrán ver lo estoy probando en mi propia maquina. Alguna sugerencia?? Desde ya muchas gracias!!! Saludos!! |
#2
|
||||
|
||||
supongo por "tilda" entiendes que se congela la interfaz gráfica, si es así, añade un componente TIdAntiFreeze con las opciones por defecto si eso.
Saludos
__________________
Si usted entendió mi comentario, contácteme y gustosamente, se lo volveré a explicar hasta que no lo entienda, Gracias. |
#3
|
|||
|
|||
Lepe!! Gracias por responder!!
Si como te comentaba se tilda la interfaz gráfica y por ende se corta la transmisión, pruebo lo que me decís y te digo! Gracias!! Saludos! |
#4
|
|||
|
|||
Holaaa lepe! Probe lo que me dijiste, mejor bastante el form no se traba como antes, pero llega hasta un punto de la descarga y luego se tilda!!
Abra que agregarle otro componente?? Saludos y gracias!!!!!! |
#5
|
||||
|
||||
Y si haces la descarga con, por ejemplo, filezilla ¿funciona bien?. Hay que ir descartando cosas.
|
#6
|
|||
|
|||
Casimiro como andas!! Gracias por responder.!!!
Acabo de hacer la prueba filezilla tira unos errores pero lo termina bajando. Este es el log: Respuesta: 257 "/Publica/Nuevo" Comando: PASV Respuesta: 227 Entering Passive Mode (201,254,82,114,4,237) Comando: LIST Respuesta: 150 Here comes the directory listing. Respuesta: 226 Directory send OK. Estado: Directorio listado correctamente Estado: Resolviendo la dirección de xxxxxxxx Estado: Conectando a xxxxxxxxx... Estado: Conexión establecida, esperando el mensaje de bienvenida... Respuesta: 220 Welcome to blah FTP service. Comando: USER anonymous Respuesta: 331 Please specify the password. Comando: PASS ************** Respuesta: 230 Login successful. Comando: OPTS UTF8 ON Respuesta: 200 Always in UTF8 mode. Estado: Conectado Estado: Comenzando la descarga de /Publica/Nuevo/Prueba.exe Comando: CWD /Publica/Nuevo Respuesta: 250 Directory successfully changed. Comando: PWD Respuesta: 257 "/Publica/Nuevo" Comando: TYPE I Respuesta: 200 Switching to Binary mode. Comando: PASV Respuesta: 227 Entering Passive Mode (201,254,82,114,4,241) Comando: RETR Prueba.exe Respuesta: 150 Opening BINARY mode data connection for Prueba.exe (2551959552 bytes). Respuesta: 421 Timeout. Error: Conexión cerrada por el servidor Error: Conexión superó el tiempo de espera Error: Transferencia fallida después de transferir 3 GB en 1955 segundos Estado: Resolviendo la dirección de xxxxxxxxx Estado: Conectando a xxxxxxx... Estado: Conexión establecida, esperando el mensaje de bienvenida... Respuesta: 220 Welcome to blah FTP service. Comando: USER anonymous Respuesta: 331 Please specify the password. Comando: PASS ************** Respuesta: 230 Login successful. Comando: OPTS UTF8 ON Respuesta: 200 Always in UTF8 mode. Estado: Conectado Estado: Comenzando la descarga de /Publica/Nuevo/Prueba.exe Comando: CWD /Publica/Nuevo Respuesta: 250 Directory successfully changed. Estado: Transferencia omitida Estado: Recuperando el listado del directorio... Comando: TYPE I Respuesta: 200 Switching to Binary mode. Comando: PASV Respuesta: 227 Entering Passive Mode (201,254,82,114,5,138) Comando: LIST Respuesta: 150 Here comes the directory listing. Respuesta: 226 Directory send OK. Estado: Directorio listado correctamente Estado: Desconectado del servidor Osea tira todos esos errores pero el archivo llego, no me fije la comprobación Md5, pero bueno. Estaba leyendo lo del servidor pasivo o activo, cual es mejor? Aca dejo el vsftpd.conf # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem Bueno ya no se que mas poner!!! jajaa Cualquier cosa me avisan! Saludos y gracias! |
|
|
Temas Similares | ||||
Tema | Autor | Foro | Respuestas | Último mensaje |
Ayuda con incompatibilidad del Post de TIdHTTP de Indy 8 con Indy 10 | rolandoj | Internet | 13 | 24-12-2008 13:19:01 |
Indy velocidad de transferencia, por codigo. | JXJ | Varios | 2 | 13-08-2008 22:49:17 |
Como reemplazar Indy 10 por Indy 9 en Delphi 2007 ? | rolandoj | Internet | 0 | 13-02-2008 18:44:31 |
La aplicación de tilda | gbalma | Firebird e Interbase | 2 | 08-12-2006 16:00:47 |
Transferencia FTP no se finaliza | DarkByte | Internet | 0 | 05-03-2005 10:39:35 |
|